Electrical Airborne Heavy Duty Flexible Retractable Fencing Boom Barrier Remote Control Gate

DESCRIPTION

The product consists of four parts: Housing, transmission mechanism, control unit, and boom. It’s no need to distinguishes between left and right directions. It’s is used in application scenarios for vehicle access management in residential areas, commercial properties, enterprises and institutions. This barrier gate is a heavy-duty type with fence boom.

PRODUCT KEY FEATURES

*Motor drive, with connecting rod transmission mechanism, balance spring, stable and reliable operation, motor life up to more than 2.5 million times, spring life of 400,000 times.

*The entire series comes standard with a rebound function when encountering obstacles, which will automatically rebound when the boom is obstructed during the descent process.

*Support external radar, coil, infrared anti-smash function, built-in DC 12V power supply output, can be used for external radar power supply.

*Support RS485 communication or RS485 parallel connection

Working environment parameters:

Housing dimension: 530*487*1400mm

Motor type: BLDC Motor

Motor Power: 180W

Total length: 6m (include housing)

Boom useful length: ≤ 5.47m

Opening/Closing time: 4s~9s

Working voltage: DC24V

Working temperature: -35 ℃~+80 ℃

Switching power supply input voltage: AC200~240V

Controller input voltage: DC24V ± 10% 7.5A

Relative humidity: 30% to 80% (no condensation)

Remote control distance: ≥ 30 meters

Insulation level: F

Protection level: IP54

FUNCTION AND FEATURES

1. Arm grip structure

The connecting rod transmission has better operating strength, stability and reliability

2. Turbine vortex rod and gear structure

Implement power-off self-locking function to effectively prevent falling booms from hitting the vehicle

3. Planetary gear structure

Standard design, with greater and more stable motor power

4. Mechanical limit triangle plate

Adjustable speed for smoother rising and falling

5. Motor drive, with connecting rod transmission mechanism, balance spring, stable and reliable operation, motor life up to more than 2.5 million times, spring life of 400,000 times.

6. The entire series comes standard with a rebound function when encountering obstacles, which will automatically rebound when the boom is obstructed during the descent process.

7. Support external radar, coil, infrared anti-smash function, built-in DC 12V power supply output, can be used for external radar power supply.

8. Support RS485 communication or RS485 parallel connection

PRODUCT PARAMETERS

CASE REFERENCE

Pole Assembly Instructions

1. Before leaving the factory, the movement has been adjust to the closed position. Note that the curved arm at "M" is tightly attached to the triangular plate.
2. Remove the Chassis lid. Open both sides of the Chassis doors.

3. Install 6 round head flat keys 8 * 8 * 28 at the 6 key slots on both ends of the main shaft of the movement.

4. Install G501 handles from both ends of the spindle. Attention: When aligning the keyway, ensure that the handle is level.

5. Install elastic washers D10 and hexagon socket head screws M10 * 45 into the holes of both ends of the pole. Attention: Do not lock it temporarily.

6. Insert the G501 airborne brake pole into the middle of the two poles and align the four screw holes.

7. Install 4 external hexagonal bolts M10* 75 at the aligned 4 holes, and insert elastic washer D10 on the other end and tighten with cap nut M10.

8. Rotate the handwheel of the movement at "E" to make the brake lever turn to a horizontal position.

9.Install the G501 pivot shaft, G501 pivot sleeve, and G501 pivot head, and connect the brake rod adjustment connector to the connection seat on the chassis. And tighten the tightening screw sleeve of the adjusting connector.

10. Connect the power and debug the controller.