SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
MORE SINOMATIC, MORE SECURITY
Add to Cart
24V Solar Power Panel Rechargeable Battery Automatic Type Electric Control Swing Gate Motor
PRODUCT DESCRIPTION
Swing gate operator SW200DC designed for both residential single leaf and double leave, with soft start & slow stop, automatic close, automatic reverse function. The back up battery is available, also has interface for infrared sensor, alarm light, wall button, etc..
TECHNICIAL SPECIFICATIONS
| Unit Model | SW200DC |
| Power Supply | AC220V/50Hz |
| Maximum Loading weight | 200kg/Leaf |
| Motor Power | DC24V/40W |
| Driving Method | Screw driving piston type |
| Limit switch | Stop block |
| Gate Moving Speed | 2cm/s |
| Max. Single-Leaf Length | 2m |
| Remote control Range | ≥30m |
| Recording of Up Remotes | 32 |
| Remote Frequency | 433.92MHz |
| Work Duty | S2 30min |
| Working Temperature | -20℃~70℃ |
DETAILED PRODUCT DESCRIPTION
MAIN FEATURES
1.Soft start slow stop, automatic close, obstacle detection by automatic reversng.
2.Interface for GSM, infrared sensor, alarm light, wall button.
3.Back up battery is available.
4.Works with solar panel.
5.Shell material is aluminum, arm is stainless steel.
6.Separate control unit, easy to install.
STANDARD UNIT
motor * 2pcs.
control box * 1pcs.
control board * 1pcs.
remote control * 2pcs.
manual release key * 1pcs.
user manual*1pcs.
mounting accessories.
Installation Steps
Preparation Before Main Engine Installation
a) Before installing the door opener, please confirm the correct installation of the door to ensure that the door can be easily manually operated, and the door safety stopper can effectively prevent the door to continue moving.
b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If not install the electric lock, the distance between door bottom and ground should be ≥20mm;
c) The main engine recommended mounting height is about 300 ~ 800mm from the ground, and make sure there are reliable fixed points for mounting brackets.
Cable
In order to ensure the normal operation of the door opener and protect the cable from damage, please use PVC pipe laying motor, power cable, and control cables, and separate two PVC pipes to lay (motor and power cable) and (control cable), respectively.
Mounting brackets
In order to install the main motors firmly, recommend to use the expansion screws to fix the mounting brackets.