SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
MORE SINOMATIC, MORE SECURITY
Add to Cart
2022 Metro Station Entry Control QR code reader flap turnstile turnstile door
PRODUCT DESCRIPTION
A flap barrier turnstile is used when both heightened security and electronic optical turnstile access control are desired. These turnstiles provide a barrier to entry with a very pleasing and inviting appearance.
Luxury Intelligent flap turnstile gate ---can be compatible with IC card , ID card ,barcode card , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff. Flap turnstile gate can be widely used in the station, wharf subway , factories, office building, hotel, clubs, intelligent community, enterprises and institution that need intelligent access management.
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop
working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
TECHNICIAL SPECIFICATIONS
| Description | Parameters |
| Lane Width | 550-570mm |
| IP | IP54 |
| Pass Speed | 30 persons/min |
| Power supply | AC220V/110V,50/60Hz, DC24V |
| Drive Mode | Motor drive |
| Max Power Consumption | 100W |
| Opening time | 0.5S |
| Humidity | ≤90% coagulation free |
| Noise | ≤50dB |
| Service Life | More than 5,000,000 cycles |
| Outside packing | 130x40x116cm |
| Working Environment | -20°C~+60°C |
| Gross Weight | 85KGS |
Application
Sinomatic full automatic flap barrier gate are widely used in the following sites: