
Add to Cart
RFID Face Recognition Qr Code Scanner Access Control System Automatic Gate Flap Barrier Turnstile Gate
Standard parameters
Moduel No. | SN-FB04 |
Size | 1200* 980*300mm |
Material | stainless steel 304 + acrylic panel |
Channel width | 550mm |
Thickness of the cabinet | 1.2-1.5mm |
Passing speed | 30 persons / minute |
Communication interface | RS485 |
Opening time | 0.2s |
Working temperature | -40℃ ~ 70℃ |
Drive motor | Brushless DC24V |
Infrared | 4 pairs at least |
Life | 10 million times |
Power | 40w |
Working voltage | AC100-240V |
Working environment | indoor and outdoor (outdoor canopy) |
Features:
(1) Automatic return function: After the passage process is completed, the brake wings automatically return to the
initial blocking position.
(2) Power-off and opening function: When the power is off, the system will automatically open the brake wings to
open, which is convenient for evacuation of the crowd and meets fire protection requirements.
(3) Anti-illegal intrusion function: When the card is invalid, there is no card swiping, or the passage is forbidden,
the forcible entry into the channel will be regarded as illegal intrusion, and the system will automatically alarm
and close the flap.
(4) Anti-reverse intrusion function: Before the end of the passage process in a certain direction, pedestrians entering
the passage from the opposite direction will be regarded as reverse intrusion, the system will automatically alarm and
close the wing.
(5) Anti-trailing function: The photoelectric switch detects the pedestrian traffic situation, and detects the following
phenomenon (the people behind are close to the person in front, intending to pass without swiping the card), the
system will automatically alarm and close the brake wings.
(6) Intelligent linkage alarm: including illegal intrusion, reverse traffic and other alarms, which can be linked with other
alarm monitoring equipment and can be heard.
(7) Anti-pinching and anti-collision function:
A. Infrared anti-pinch: Install multiple pairs of photoelectric switches near the area where the wing is active (anti-pinch area).
Once a person or object is detected in the anti-pinch area, the wing automatically stops; The flaps continued to move.
Product advantages
1. Cabinet part:
1.1. Frame material: 304 #, thickness 1.2- 1.5 mm;
1.2. Multi-layer drawing on the surface of the frame;
1.3. The frame is welded by fixtures;
2. Drive Movement part:
2.1. Low noise;
2.2. Movement frame material 6061 profile aluminum;
2.3. The inner guide pulley adopts metal bearings;
3. Electric control accessories:
3.1. Switching power supply adopts brand power supply to make its operating
voltage more stable;
3.2. The infrared sensor uses a domestic brand, and the internal parts are
imported parts;
PRODUCT DESCRIPTION
It is mainly used for the entrance and exit management of the passage. It has the characteristics of fast opening,
safety and convenience. It is an ideal management and guidance equipment for high-frequency entrance and exit
passages for pedestrians. Widely used in airports, subway stations, stations, terminals, attractions, parks, shopping
malls, office buildings, pedestrian walkways and other places.