SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
MORE SINOMATIC, MORE SECURITY
Add to Cart
Revolving Hotel Fingerprint Scanner DC Motor 5 million MCBF Slim Design glass wing barrier gate
ABOUT THE SWING BARRIER
Glass Turnstiles Torniquete is a part of the access control system and is a crucial a part of trendy entrance control. The door wing is pushed by the control system and robotically opens and closes. The working mode can be chosen by programming: The door wing is robotically opened as long as the verification entrant is permitted. Closed after delay, the delay time is adjustable.
Glass Turnstile Baffle is an intelligent channel administration device that has been carefully developed, developed and produced over the years. It is a high-tech product primarily for intelligent administration of personnel channels. The gadget combines mechanical, digital, microprocessor control and numerous identification applied sciences, and is equipped with quite a lot of identification system devices and reliable efficiency safety units, alarms, direction indicators, and extended friendliness. The LED counting display interface coordinates the clever control and management of the channel.
Glass Gate Turnstile has standard enter and output interfaces, and is the best choice for system integrators. It may be simply compatible with IC card, ID card, barcode card, fingerprint and other card reader identification units, offering civilized and orderly access for entry and exit personnel. Methods to successfully handle personnel out and in.
Glass Gate Turnstiles is an architecturally brilliant swing pedestrian barrier unites security and clever detection expertise to provide silent, smooth and highly dependable passage entry.
PRODUCT PHOTO
PRODUCT SPECS
| Tech Parameters | |
| Product Name | Slim Turnstile,Slim Barriers,Glass Gates |
| Model | SN-SB05 |
| Brand | SINOMATIC |
| Design Size | 1200*220*1000 mm |
| Chassis Material | 304 # stainless steel |
| Relative humidity | -10 ° C ~ 60 ° C, relative humidity 5% ~ 95%, no condensation |
| Maximum channel width | <900mm |
| Temperature | -20ºC-60ºC |
| Travel speed | 30 persons/min |
| Working environment | indoor and outdoor |
| Input interface | Relay switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA |
| Communication Interface | RS485 (distance ≤ 1200 m), TCP / IP |
| Lane width | ≤1200mm |
| Flap Opening/Closing Time | 0.1s |
| Automatic reset time after failure | 10 seconds |
| Swing arm transmission angle | 180 degrees |
| Thickness | 1.5mm SS304 |
| Driving Motor | 24V |
| The time required to enter the common state after power on | 3 seconds |
| Supplu Voltage | AC100V to 260V |
| Gate components | chassis, movement, control board and power supply |
| Service life | continuous opening and closing more than 3 million times |
| Structure | Frame structure / Stainless steel housing |
| Working environment | Indoor and outdoor (shed) |
| Turning of the gate | one-way / two-way |
| Drive Motor | DC brushless Motor |