SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
MORE SINOMATIC, MORE SECURITY
Add to Cart
DESCRIPTION
Barrier Gate controller -- variable frequency type, is the enhanced barrier control which speed can be adjusted. Adopting full remote control mode, with the open /stop/close wire control interface,counting interface, special encoder limit interface, loop detector interface, infrared interface, open limit,close limit output interface, communication interface.The remote control code is the learning code, and receiver module adopts external superheterodyne reception.
GENERAN FEATURES
1. Arm direction can be quickly interchanged
2. Run speed can adjust from 0.9sec to 6sec, 4sec lift max 6m arm.
3. Arm automaticlly locking when power off, then open the barrier gate by motor wheel
4. Remote control to operate the barrier gate.
5. Auto-reverse when the boom meets obstruction.
6. Infrared photocells connector is available.
7. Loop detector connector is available.
8. Well-intergrated with car parking system equipment,with wire control(must be switch signal).
9. Connector for traffic light(AC220V,power less than 40W)
10. Offering dry contact signal for car parking system(COM,NC,NO)
11. Auto-delay when closing(adjustable)
Technical parameters
| Working temperature(motor) | -35℃~+85℃ |
| Rated voltage | DC24V |
| Running speed | 1.5s-6s |
| Rated curren | 8.58A |
| Rated power | 140W |
| No-load speed | 1850rpm |
| Rated speed | 1400rpm |
| Output Power | 56.8N.m |
| Relative humidity | ≤90% |
| Remote control distance | ≤100M(in the open place) |
| IP Degree | IP54 |
| Place of origin | SHENZHEN CHINA |
The parameter for selecting the balance tension spring
| Arm Type | The Length of arm | Selection Spring | |
|
Type
|
Spec.(diameter*Length) | ||
| Straight Arm/Folding Arm | 6M≥L＞5M | Extension Spring | (ø5.5x280)+(ø4.5x280) |
| 5M≥L≥4.5M | (ø5.5x280) | ||
| 4.5M＞L≥3M | (ø4.5x280) | ||
| Fence Arm | 5M≥L≥4M | (ø6.5x280)+(ø6.5x280) | |
| 4M＞L≥3M | (ø5.5x280)+(ø4.5x280) | ||
FEATURES
| 1.Mechanical and electrical integration:quickly assembly,easy maintenance. |
| 2.Molding production:highprecision,fast efficiency and guaranteed quality. |
| 3.Worm-gear secondary variable speed transmission:motor wheel design,gate opening by manually when power off,no blocking, no oil leakage,large torque,low noise,can normally operation at the temperature of minus 45 degrees,ets. |
| 4.DC brushless motor desgin:low consumption, high efficiency,no overheat, wide speed adjustment. |
| 5.Hall limit:Automatically detects the limit when power on without debugging, detecting the motor speed at all times and running at constant speed. |
| 6.Curved triple connecting rod structure,easy to adjust |
| 7.Arm direction quickly interchanged:interchanged according to different directions on construction site,reduce inventory and capital pressure. |
| 8.Special DC brushless controller:use integrated chip dirve, fast processing speed, large memory, powerful function;24V low voltage power supply, adapt to global voltage. |
PACKING DETAILS
| Packing Size | 1030(H)*380(L)*450(W) mm |
| Weight | 50KG for Anti-Crash Vehicle Barrier Gate, Vehicle Barrier System With |
| Packing detials | The normal package is paper carton.If wooden box is needed to export overboard,the wooden box will be fumigated.Can also use pallet. |