SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
MORE SINOMATIC, MORE SECURITY
Add to Cart
Product description
Barrier anti-hit radar is used microwave radar technology. Apply for highway and entry and exit of parking lot to replace loop and loop detector.
Why choose barrier radar detector?
1) Can replace loop detector completely; no wiring layout, save time and cost.
2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.
3) Work in range of 24-24.5Ghz without effects from any climatic environment.
4) Can effectively distinguish vehicles and humans to avoid any hitting.
5) Can be used for trigger detection, e.g. trigger camera to capture the picture.
6) Can be used to trigger the alarm in the warning zone.
7) Can record the traffic and no data is lost when power is off.
| Product | Radar sensor |
| Working frequqncy | 24G |
| Working voltage | DC 12v |
| Detected | Person, car |
| Background threshold | Auto or manual |
| Sensitivity | adjustable |
| Detect distance | 6m(adjustable) |
| Dimension | 115mm x 85mm x 31.2mm |
| Communication port | RS485, on and off signal |
| Dimension | 115x85x31.2mm |
| Material | ABS+PC |
| Protection | IP65 |
Installation
1. Install on barrier gate
H=65CM, fixed radar sensor on barrier. Radar connects with DC12V power input, analog on and off signal. Then power on.
2. Install on holder
Confirm the holder position, the holder must install at alongside of barrier. Fix radar at 65cm height from ground. Radar connects with DC12V power input, analog on and off signal. Then power on.
Case reference